Week 10: First Blood: Final Fight 2K14 - Electric Avenue Edition

Since My circut didn't have the amplitude I wanted, I decided to revisit the idea of putting an amp in after my filters.

I connected it with some wiring that tapped into the signal input and ground or my circuit. I was eventually getting sound out of both speakers but ran into the same problem of not having enough volume. 

 I tried making some more adjustments to the amp, then some adjustments to the connection between it and the filters. Unfortunately it didn't seem to do much.

 I decided that my best course of action was to get rid of the speaker entirely and replace it with a 1/4 inch jack so that I could use a mixer preamp. This turned out to be better anyway because it now gives me more control over the output volume.

Tada!